TESTO SMART PROBE VAC SET KIT
Details
-
In Stock Unit:Each
Description
Smart Probes – VAC Set
Testo P/N: 0563 0003
Key Features:
Measures air velocity, temperature, relative humidity, wet bulb / dew point, volume flow.
Kit includes instruments to measure, balance, troubleshoot, and optimise ventilation systems performance.
RH & air flow measurements in-duct and at registers viewed simultaneously
Calculation of enthalpy with air flow & RH probes
App allows you to photograph objects with smart device.
The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multi outlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system
Advantages of the testo Smart Probes VAC set
The measuring instruments in the testo Smart Probes VAC set can be connected quickly and easily to your smartphone or tablet via Bluetooth. You can therefore measure air velocities, humidity, volume flows and temperatures with intuitive ease using the testo Smart Probes App. The measuring instruments are easy to transport in the handy testo Smart Case and always to hand when needed.
Advantages and applications of the individual measuring instruments:
testo 405i: thermal anemometer with smartphone operation
- Measurement of air velocity, volume flow and temperature
- Simple configuration of the dimension and geometry of the duct cross-section for measuring the volume flow
- Telescopic tube which can be extended to 400 mm
testo 410i: vane anemometer with smartphone operation
- Measurement of air velocity, volume flow and temperature
- Display of the volume flow of multiple outlets in order to adjust systems
- Easy parametrization of the outlet (dimension and geometry)
testo 605i: Thermohygrometer with smartphone operation
- Measurement of air humidity and temperature in rooms and ducts
- Automatic calculation of the dew point and wet-bulb temperature
testo 805i: infrared thermometer with smartphone operation
- Non-contact infrared measurement of surface temperature
- Measuring spot marking via highly visible 8-point laser circle
- Easy selection of emission level via stored materials list
- Image documentation with readings and measuring spot marking
Practical App with special functions for measurement data analysis on your smartphone or tablet
Measurement data is transmitted wirelessly from the relevant measuring instrument to the testo Smart Probes App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. The App also offers practical functions such as timed and multi-point mean calculation, volume flow configuration, comparison of several volume flows at various outlets, automatic calculation of the dew point and wet-bulb temperature and identification of areas susceptible to mould via a clear traffic light system. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.
System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0
What's Included: testo 405i, testo 410i, testo 605i, testo 805i, testo Smart Case (VAC), batteries & calibration protocol.
Technical Data
| testo 405i | testo 410i | testo 605i | testo 805i | |
| Instrument Sensor | Hot wire | Vane | Humidity – capacitive | Infrared |
| Measuring range | 0 to 30 m/s | 0.4 to 30 m/s | 0 to 100 %RH | -30 to +250 °C |
| Accuracy ±1 digit | ±(0.1 m/s + 5 % of m.v.) (0 to 2 m/s) ±(0.3 m/s + 5 % of m.v.) (2 to 15 m/s) | ±(0.2 m/s + 2 % of m.v.) (0.4 to 20 m/s) | ±(1.8 %RH + 3 % of m.v.) at +25 °C (5 to 80 %RH) | ±1.5 °C or ±1.5 % of reading 0 to +250 °C) ±2.0 °C (-20 to -0.1 °C) ±2.5 °C (-30 to -20.1 °C) |
| Resolution | 0.01 m/s | 0.1 m/s | 0.1% RH | 0.1 °C |
| Sensor type | NTC | NTC | NTC | - |
| Measuring range | -20 to +60 °C | -20 to +60 °C | -20 to +60 °C | - |
| Accuracy ±1 digit | ± 0.5 °C | ± 0.5 °C | ±0.8 °C (-20 to 0 °C) ±0.5 °C (0 to +60 °C) | - |
| Resolution | 0.1 °C | 0.1 °C | 0.1 °C | - |
| Compatability | Requires mobile | Requires mobile | Requires mobile | Requires mobile |
| Storage temperature | -20 to +60 °C | -20 to +60 °C | -20 to +60 °C | -20 to +60 °C |
| Operating temperature | -20 to +50 °C | -20 to +50 °C | -20 to +50 °C | -10 to +50 °C |
| Battery type | 3 micro batteries AAA | 3 micro batteries AAA | 3 micro batteries AAA | 3 micro batteries AAA |
| Battery life | 15 hrs | 200 hrs | 250 hrs | 30 hrs |
| Dimensions | 200 x 30 x 41 mm Telescope extendable | 154 x 43 x 21 mm 40 mm Vane diameter | 243 x 30 x 24 mm 100 mm probe shaft
| 140 x 36 x 25 mm |
| Optics | - | - | - | 10:1 |
| Laser marketing | - | - | - | Diffractive optics (laser circle) |
| Emissivity | - | - | - | 0.1 to 1.0 adjustable |
Please log in for more technical information.
Related Products
-
$1,824.90 (inc GST)
-
-
$1,244.10 (inc GST)
-
$1,120.90 (inc GST)
