Testo P/N: 0563 0510
Differential pressure measurement from 0 to 100 hPa
Flow measurement possible with a Pitot tube (available as an option)
Magnets on the rear allow hands-free work
10 units to choose from, display in pascals can be selected
Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.
Accurate: temperature and air density compensated pressure difference measurements for accurate and reliable results
Easy to use: compact design; only three keys for easy use
Intelligent: magnets on the rear side of the meter that stick to almost any metal object leaving your hands free for other tasks; backlit display for use in all lighting conditions
Safe: belt bag and slip-on protective cap that ensure that your meter is stored safely; hand strap to prevent your meter from being accidentally dropped
What’s included: Testo 510 differential pressure meter, protective cap, calibration protocol certificate, belt bag, batteries & 2x 40cm silicon hose.
| General technical data | |
|---|---|
Dimensions | 119 x 46 x 25 mm |
Operating temperature | 0 to +50 °C |
Protection class | IP40 |
Seceltable units | hPa, mbar, Pa, mmH2O, inHâO, inHg, mmHg, psi, m/s, fpm |
Maximal static pressure | 500 mbar |
Measuring rate | 0.5 s |
Battery type | 2 AAA micro batteries |
Battery life | 50 h (average, without display illumination) |
Storage temperature | -40 to +70 °C |
Weight | 90 g (with batteries and protective cap) |
| Differential Pressure - Piezoresistive | |
|---|---|
Measuring range | 0 to 100 hPa |
Accuracy | ±0.03 hPa (0 to 0.30 hPa) ±0.05 hPa (0.31 to 1.00 hPa) ±(0.1 hPa + 1.5 % of mv) (1.01 to 100 hPa) |
Resolution | 0.01 hPa |
Air conditioning systems are equipped with filters which prevent dirt from the outside air entering the indoor air. These filters are to be inspected regularly to make sure they are still fully functional. To do this, the pressure is measured in front of and behind the filter. The result is the differential pressure. If it is too high, the filter is contaminated and needs changing.
The testo 510 measures differential pressures in a range of 0 - 100 hPa. The differential pressure measurement is temperature-compensated for exact readings. The readings can be displayed in pascal over the entire measuring range. Magnets on the rear of the instrument allow hands-free work.
Please log in for more technical information.
