FLASH HIGH RESOLUTION UNIVERSAL DYE
Details
-
In Stock Unit:Each
Description
|
OUR PART NUMBER |
RF184F |
|
PRODUCT |
CLIPLIGHT FLASH HIGH RESOLUTION UNIVERSAL DYE |
|
OTHER KNOWN PART NUMBERS |
980 |
|
DESCRIPTION |
ALL SYSTEMS - UP TO 5 TONS | 17 KW
/ Flashes into refrigerant as mist – instant distribution
/ Highly stable – will not react with moisture
/ No dye injector needed – clean, no mess installation
/ Compatible with all oils & refrigerants
FLASH™ is an advanced class of UV dye that distributes cleanly and instantaneously into all systems. FLASH™ uses DRY R™ instead of POE oil as its carrier – keeping the dye stable and preventing it from crystallizing with moisture.
FLASH™ is engineered to HVACR industry standards and is easily installed into a fully-charged system, with NO pump down or recovery. One can treats up to 64 oz | 1.8 L of oil.
Apply second can for AC/R systems 5+ tons
(HOSE NOT INCLUDED)
Please see below about instructions required to be carried out after purchasing this item. Item returns will not be accepted if you are not technically qualified to perform tasks required. Quick 7 step installation: Install product into fully-charged system 1. Turn Unit Off 2. Confirm piercing pin is below washer and connect tap hose to can. 3. Attach hose fitting to low side service port and purge hose. 4. Turn valve handle clockwise to pierce can. 5. Turn Valve handle counter clockwise to charge can. 6. While inverted, turn system onto empty can. 7. Once can is empty, remove hose and can. Purge hose with dry nitrogen for reuse if desired.
|
|
KNOWN SUITED FOR: |
HVACR |
