SUPER CHANGE R22 SYSTEM RETROFIT #981
Details
-
In Stock Unit:Each
Description
OUR PART NUMBER | RF184SC |
PRODUCT | CLIPLIGHT SUPER CHANGE R22 SYSTEM RETROFIT #981 |
OTHER KNOWN PART NUMBERS | 981 |
DESCRIPTION | / Links Mineral/AB oil to any HFC refrigerant
/ Eliminates oil change out
/ Replaces R22 line set conversion flush
/ Combats systems contamination reducing TEV failure
WHAT IS SUPER CHANGE™?
SUPER CHANGE™ allows for a fast & easy conversion from R22, or any mineral/alkylbenzene oil system, to all HFC refrigerants, including POE-based R407C & R410A.
HOW DOES IT WORK?
SUPER CHANGE™ creates a strong compatibility link between mineral/alkylbenzene oils & HFC refrigerants. No change out of the oil, "O" rings, or gaskets required, eliminating compressor downtime & line set flush.
OTHER BENEFITS:
Super Change™ removes water and oxygen preventing corrosion, oil breakdown, helps restore lubricant to original condition, to combat system contamination, reducing TEV failure. It also extends compressor life by boosting efficiency, reducing oil logging in systems.
Super Change™ also rejuvenates o-rings, elastomers, and gaskets, in most cases eliminating the need to replace them when switching to an HFC refrigerant. Components worn through normal wear and tear may need to be replaced.
Please see below about instructions required to be carried out after purchasing this item. Item returns will not be accepted if you are not technically qualified to perform tasks required. REPLACE REFRIGERANT, THEN INSTALL PRODUCT INTO FULLY CHARGED SYSYTEM. 1. Turn Unit Off 2. Confirm piercing pin is below washer and connect tap hose to can. 3. Attach hose fitting to low side service port and purge hose. 4. Turn valve handle clockwise to pierce can. 5. Turn Valve handle counter clockwise to charge can. 6. While inverted, turn system onto empty can. 7. Once can is empty, remove hose and can. Run system for 10 minutes.
Apply Second can for systems 6+ Tons
|
KNOWN SUITED FOR: | R22 SYSTEMS |
